Author Archives: CG Naval Engineer

SeaPerch-Hawaii 2016 Event & Mentor/Practice Dates

While the new obstacles for 2016 have not yet been announced, we have our competition, practice and build days set:
Build Day 
Saturday, 23 Jan 2016
~9:30am till 1pm
We will be training mentors from 8-9:30 and then helping students build their robots immediately following.
Practice Day
Saturday, 20 Feb 2016
8:00am till 1pm
We will have the obstacles set up for students to run their robots through and gain an understanding of the course.
Regional Competition
Saturday, 27 Feb 2016

Final Results

Wow, what an event.  Mahalo to everyone who came out for the 2015 SeaPerch competition at Base Honolulu.  We had over 200 students signed up, and it was just a terrific event.  Below are some of the teams that had some exceptional results.  Your hard work and dedication was noted.

Stock class fastest “Obstacle Course” 1st place Highlands Intermediate 4
Stock class Most Points “Finesse” Highlands Intermediate 3
Best combined poster and video presentation 1st place Highlands Intermediate 2
Stock and Open Poster Presentation Ribbon 1st place Iroquois Point Elementary School
Stock and Open Poster Presentation Ribbon 2nd place Aikahi Elementary 1  
Stock and Open Poster Presentation Ribbon 3rd place Highlands Intermediate 2
Stock and Open Poster Presentation Ribbon 4th place August Aherns 3  
Stock and Open Poster Presentation Ribbon 5th place Ewa Makai Middle  
Stock and Open Video Presentation Ribbon 1st place Highlands Intermediate 2
Stock and Open Video Presentation Ribbon 2nd place Ewa Makai Middle  
Stock and Open Video Presentation Ribbon 3rd place Makalapa Elementary 1
Stock and Open Video Presentation Ribbon 4th place Nanaikapono Elementary 1
Stock and Open Video Presentation Ribbon 5th place Mokapu Elementary 1  
Most Points High School Team Pearl City High (ST-35)

The top two robots to qualify for nationals were:

1st – Highlands #3
2nd – Highlands #2

In the event either of these teams can’t go
3rd – Makalapa #2

Final Event Rules Posted

Less than one week to the big day.  Based on the lessons learned from our practice day, we have made a few changes to the event this year.  Some key reminders:

  • Upload your video via wetransfer.com to the email address andy@seaperch-hawaii.org by Thursday 19 Feb.  This gives us time to verify receipt, and put them all together on one loop for the judges.

  • High school students will not do a video, they will have a 5 minute presentation to the panel of judges.

  • We are going to be running four teams at a time in both sections.  And we are going to be doing this in the shallow end due to the restrictions on the finesse obstacles.  Viewing will be somewhat constrained for parents.  We apologize, but we had to balance viewing versus hosting a record number of schools.

Please review and let me know if you have any questions.

Can’t wait to see everyone on the 21st!

Rules and Information Supplement for the 2015 Hawaii State Sea Perch Challenge v2

Last Call for registration – This Friday 30 Jan

Due to overwhelming response, we are cutting off registration for our 21 Feb SeaPerch event on Friday, 30 Jan.  The list of the teams we have so far:

Aikahi Elementary
August Aherns
Hale Kula
Hickam Elementary
Iliahi Elementary
Iroquois Point Elementary School
Lehua/Momilani Elementary School
Makalapa Elementary
Mokapu Elementary
Momilani Elementary
Nanaikapono Elementary
Wahiawa Elementary
Ewa Makai Middle
Highlands Intermediate
Mililani Middle
Washington Middle
James Campbell High School
Pearl City High
Radford High

We look forward to see our over 200 competitors on the 21st of Feb!

Mahalo!

The 2015 Obstacles are announced!

For those who don’t follow SeaPerch  (you should) would have missed that the obstacles for the 2015 SeaPerch events have been announced.

There are two categories:


 Obstacle Course

An underwater remotely operated vehicle (ROV) must be able to maneuver successfully under its own power. If a vehicle cannot maneuver to the appropriate location to perform its task, the vehicle is of no use.
The submerged obstacle course involves large rings (22″ minimum diameter), oriented in any direction, through which the vehicles must travel. Teams must navigate through the obstacle course, surface, then re-submerge and return through the course to the end. Consideration of optimal maneuverability, control and speed should be given when constructing your SeaPerch (thruster placement and orientation, tether attachment, buoyancy and ballast, etc) and control box. Scores for this round will be based on the fastest time for successfully navigating the obstacle course.

There are five (5) -22″ diameter hoops in the obstacle course.

Obstacle Course Rubric            Obstacle Course Rules

Obstacle Course


 

Finesse

While many roles for ROVs require power, most require the ability to perform delicate tasks remotely.  These tasks will require students to perform multiple independent tasks that will test their ability to operate their SeaPerches with finesse.

The course consists of three stations in which the vehicles will have to maneuver and actuate equipment on the pool floor. The max pool depth for this event is 5′

TASK 1

The first task will be a series of 5 targets that will have to be manipulated by poking the activation pad. The activation pad will need to be depressed up to 3” in order to the toggle the target. The targets will range in size and therefore difficulty. The inner diameter of the targets is as follows: 1”,1-1/2”, 2”, 2-3/8”, 3”.

The heights of the target centers will vary from 2” to 6”. Each target center is separated by 4”

target-1

TASK 2

The second task will be a series of 5 rods that will have to be lifted and placed into a series of vertical holders of different sizes.

Each rod consists of a 6” length of ½” PVC pipe with a polypropylene rope loop on one end and a small weight in the other. This design allows the rod to stand up when left freestanding in the water. The holder from which operators will have to retrieve the rings is constructed of 1” PVC pipe and will leave at least the top 2” of the rod and the entire loop exposed.

Operators will have to position the rods in one of three Vertical pipe sections with the following inner diameters: 1”, 1 ½”, 2-3/8”. More points are given for placing the rod in the smaller pipe.

pipes2

TASK 3

The third task will require teams to actuate a device to the side. A ladder or abacus type device will stand vertical in the water. The device is made of 1” PVC pipe with the rungs at different distances apart, starting at 3-1/2” to 7” apart. On 5 of those rungs will be a PVC collar made of 1-1/4” PVC pipe. This collar will be 2″ in length. Not all rungs will have collars on them to be actuated and will serve as guard rungs for the collars. These collars will have to be slid from one side of the rung to the other in order to be placed in the brightly painted area on the rung. The direction that the collar needs to be actuated will alternate from collar to collar.

ladder

Feel free to contact us if you have questions.

Aloha and happy building!

What’s missing from this list?

Mokapu Elementary School
Mililani Middle School
Wahiawa Elementary
Makalapa Elementary
Iroquois Point Elementary School
Nanaikapono Elementary
Aikahi Elementary
Hickam Elementary
Momilani Elmentary School
Waikele Elementary
Ewa Makai Middle School
Washington Middle School
Highlands Intermediate

Your School.  Sign up now, space is limited for the 21 Feb 2015, Oahu Seaperch event.